Shrinkage

Linear Shrinkage

Supported Test Methods

Standard

Description

BS1377-2:1990:6.5

Linear shrinkage

Input

Lab- Class | Linear Shrinkage

Enter the test data in the data entry fields and click Save, Ctrl+S or change the row to initiate the calculation. The values will be calculated automatically and the result will be displayed in the calculated fields.

Output

  • Graphic Text Report | L CS SHRINKAGE LINEAR
  • Graphic Table Report | L CS SHRINKAGE LINEAR MULT

Volumetric Shrinkage

Supported Test Methods

Standard

Description

ASTM D 4943-08

Shrinkage factors of soils by the wax method

BS1377-2:1990:6.3

Volumetric shrinkage (definitive method)

BS1377-2:1990:6.4

Volumetric shrinkage (subsidiary method)

Input

Lab- Class | Volumetric Shrinkage

To calculate the volumetric shrinkage, you must first select the standard from the Test_Method field on the Volumetric_Shrinkage (upper) table that the specimen is being tested against. Once selected, click Save and the necessary data entry fields will be automatically highlighted to assist you in entering the relevant data for the selected test method.

Enter the test data in the data entry fields on the Volumetric_Shrinkage_Readings (lower) table and click Save or Ctrl+S to initiate the calculation. The values will be calculated automatically and the result will be displayed in the calculated fields.

Volumetric Shrinkage Readings (lower) table is only needed if BS 1377-2:1990:6.3 or BS 1377-2:1990:6.4 is selected.


The following examples show the required fields in the lower table for each selected standard.

Volumetric Shrinkage Table (lower) - BS 1377-2:1990:6.3

Volumetric Shrinkage Table (lower) - BS 1377-2:1990:6.4

Output

  • Graph Report | L CS SHRINKAGE VOLUMETRIC CURVE
  • Graphic Text Report | L CS SHRINKAGE VOLUMETRIC
On this page