Chloride Content

Supported Test Methods

Standard

Description

AGS Code

AGS Test Type

Units

BS1377-3:1990:7.2

Determination of water-soluble chloride content

CL

SOLID_21WAT

% Dry Mass

BS1377-3:1990:7.3

Determination of acid-soluble chloride content

CL

SOLID_TOT

% Dry Mass

BS812-117:1988

Determination of water-soluble chloride salts

CL

SOLID_11WAT

% Dry Mass

BS812-117:1988:A

Qualitative test for the presence of chloride ions

CL

N/A

N/A

BS812-117:1988:B

Field tests for the determination of chloride ions

CL

SOLID_WAT

% Dry Mass

BS812-117:1988:C

Determination of chloride content using a nitric acid extract

CL

SOLID_TOT

% Dry Mass

Input

Lab-Chem | Carbonate Content

To calculate the chloride content of a specimen, you must first select the standard from the Test_Method field on the Chloride_Content (upper) table that the specimen is being tested against. Once selected, the necessary data entry fields will be automatically highlighted to assist you in entering the relevant data in the Chloride_Content (lower) table for the selected test method.

Enter the test data in the data entry fields on the Chloride_Content (lower) table for each specimen and when you change table or select save, the values will be calculated automatically and the result will be displayed in the calculated fields.

The following examples show the required fields in the lower table for each selected standard.

Chloride Content – BS1377-3:1990:7.2

Chloride Content – BS1377-3:1990:7.3

Chloride Content – BS812-117:1988

Chloride Content – BS812-117:1988:B

Chloride Content – BS812-117:1988:C

Output

  • Graphic Text Report | L CH CHLORIDE CONTENT
  • Graphic Text Report | L CH CL AND SO3 CONTENT
On this page