Magnesium / Sodium Sulphate Soundness

Supported Test Methods

Standard

Description

ASTM C 88-05

Soundness of aggregates by use of sodium sulphate or magnesium sulphate

BS812-121:1989

Determination of soundness (MgSO4)

Input

Lab-Aggregates | Soundness, and Soundness Cycles

To calculate the Soundness, you must first select the standard from the Test_Method field on the Soundness table that the specimen is being tested against. Once selected, click Save and the necessary data entry fields will be automatically highlighted to assist you in entering the relevant data for the selected test method.

Enter the test data in the data entry fields in to the lower table and click Save, Ctrl+S or change table to initiate the calculation. The values will be calculated automatically and the result will be displayed in the calculated fields.

The fields Maximum_Size, Minimum_Sieve and Group_with_Coarser are pre-populated from library table DG_AGG_SOUNDNESS_PREPOP.

Grading_of_original_sample field is pre-populated from the sieve table where a sieve test exists for the same specimen.

Magnesium / Sodium Sulphate Soundness - ASTM C 88-05 "Coarse" example

Magnesium / Sodium Sulphate Soundness - BS 812-121:1989

Soundness Cycles Information Table

Output

  • Graphic Text Report | L A SOUNDNESS ASTM C88
  • Graphic Text Report | L A SOUNDNESS BS812-121
On this page