Aggregate Particle Density and Water Absorption

Supported Test Methods


Standard

Description

ASTM C127-07

Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

ASTM C127-12

Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

BS 812-2:1995:5.3

Determination of Particle Densities and Water Absorption - Method for Aggregates all larger than 10 mm

BS 812-2:1995:5.4

Determination of Particle Densities and Water Absorption - Method for Aggregates between 40 mm and 5 mm

BS 812-2:1995:5.5

Determination of Particle Densities and Water Absorption - Method for Aggregates 10 mm Nominal Size and Smaller

BS 812-2:1995:5.6

Determination of Particle Densities and Water Absorption - Alternative Method for Aggregates between 40 mm and 5 mm Nominal Size

BS 812-2:1995:5.7

Determination of Particle Densities and Water Absorption - Method for Determination of Particle Density of Filler

CIRIA SP 83/CUR Rpt 154 A2.6

Determination of Density of Rocks with a Volume of at Least 50 ml

CIRIA SP 83/CUR Rpt 154 A2.7

Determination of Water Absorption at Atmospheric Pressure

Input

Lab-Aggregates | Particle Density & Water Absorption

Example of BS812-2:1995:5.3 (5.4 to 5.6 are the same and the CIRIA methods are also very similar).

Enter the test data in the data entry fields and click Save, Ctrl+S or change table to initiate the calculation. The values will be calculated automatically and the result will be displayed in the calculated fields.

If only SSD data is tested then, leave the Mass D field empty.

Output

  • Graphic Text Report | L A PD & WA
On this page